SPEEDWAY 7253 Use and Care Manual download pdf (Page 1)

8807253 08/13

3000LB WINCH

CALIFORNIA PROPOSITION 65

WARNING: You can create dust

when you cut, sand, drill or grind

materials such as wood, paint,

metal, concrete, cement, or other

masonry. This dust often

contains chemicals known to

cause cancer, birth defects, or

other reproductive harm. Wear

protective gear.

WARNING: This product or its

power cord may contain

chemicals, including lead,

known to the State of California

to cause cancer and birth

defects or other reproductive

harm. Wash hands after

handling.

Important!

When using equipment, a few

safety precautions must be

observed to avoid injuries and

damage. Please read the complete

operating manual with due care.

Keep this manual in a safe place,

so that the information is available

at all times. If you give the

equipment to any other person,

give them these operating

instructions as well. We accept no

liability for damage or

accidents which arise due to non-

observance of these instructions

and the safety information herein.

SPECIFICATIONS

Single line rated pull: 3,000

pounds

Motor: Permanent magnet

Braking action: Mechanical and

dynamic

Wire rope: 1/5 inch by 34 feet

Weight: 19.8 pounds

CAUTION:

FOR YOUR OWN SAFETY,

READ INSTRUCTION MANUAL

COMPLETELY AND

CAREFULLY BEFORE

OPERATING THIS WINCH.

Any failures made in following

the safety regulations and

instructions may result in an

electric shock, fire, and/or

serious injury.

Model: 7253

SAFETY INSTRUCTIONS

1) Never lift people or hoist loads

over people. Do not lift items

vertically. This winch was

designed for horizontal use only.

2) Do not overload the winch. Use

an optional pulley block to double

the line if the weight is over 1,000

pounds.

3) Do not attempt to use the winch

for prolonged pulls of heavy loads.

This winch is designed for

intermittent use only and is not

meant for constant heavy duty

use. Never pull a load for more

than one minute at or near the

rated load.

4) Never winch with less than five

(5) turns of wire rope around the

winch drum because the wire rope

and fastener may not be able to

withstand full load.

5) Avoid continuous pulls from

extreme angles. This will cause

the wire rope to pile up on one

end of the drum, which can cause

damage to the rope or winch.

feedback@natitools.com

1 2 3 4 5 6 7

Summary of Contents

Page 1 - Model: 7253

8807253 08/133000LB WINCHCALIFORNIA PROPOSITION 65WARNING: You can create dustwhen you cut, sand, drill or grindmaterials such as wood, paint,m

Page 2

26) Ensure the input voltagebetween the terminals of themotor is always 12 or 24 volts inorder to reach the maximumrated line pull. The winch canonly

Page 3 - Troubleshooting Guide

33) Engage the clutch by turningthe knob to the IN position. Theclutch must be fully engagedbefore the machine is used. Donot engage the clutch knob w

Page 4 - Diagrams

[email protected]

Page 5 - For Customer Service:

[email protected] American Tool Industries (NATI) makes every effort to ensure that this product meets highquality and durability standards

Page 6

8907253 08/133000LB WINCHModel: [email protected]

Page 7 - Item # Qty Description

Item # Qty Description1 1 Motor2 1 Stationary Gear Housing Assembly3 1 T-Series Carrier Assembly4 1 T-Series Rotator Gear5 1 Drum Support Plate6 4 Pan

Comments to this Manuals

No comments

SPEEDWAY 7253 Use and Care Manual Page 1

Browse online or download Use and Care Manual for Unknown SPEEDWAY 7253. SPEEDWAY 7253 Use and Care Manual User Manual

Summary of Contents

Comments to this Manuals

SPEEDWAY 7253 Use and Care Manual Page 1

Browse online or download Use and Care Manual for Unknown SPEEDWAY 7253. SPEEDWAY 7253 Use and Care Manual User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Unknown SPEEDWAY 7253